Welcome to AndCube


				More comfortable! More functional! And renovate PowerMacG4....... Covered with aluminum, it has radiation effect. This model is named "AndCube". If you are a Cube fan, PLEASE have a look at this page. You must find it very interesting!


	MERITS ETC. 1- This is anodized aluminum. Its colors seems kind of brown, but it is pure white. 2- 2.0 mm thick board; 184 mm X depth 197 mm X height 277 mm. Very compact size! 3- Assembled by screws. It was hard work to arrange the screw holes perfectly. 4- This is made of aluminum, which radiates heat effectively. 5- Please refer to the photo for assembling. You can put a 2.5-inch HD case on the square space on the top. Don't you think it is a cool and excellent idea? Actually, it was caused by chance, though. 6- The CD slot was made horizontal, instead of vertical. You can pick out CDs easily and comfortably. 7- This model has PowerMac G5-style. It is so-called "G5 mini." 8- The outlets' space is changed to the back side from the bottom side, which enables you to insert plugs easily. 9-MADE IN JAPAN. ATTENTION:　Please read thoroughly. This model is offered on the Internet, but please purchase it on your own responsibility. It requires renovating the main body. Even if the main body gets broken, we cannot take responsibility. Please remember, "No claim, no return." Even if something happens, it will be beyond the guarantee by Machintosh. Instruction manuals, or something like that, are not prepared, so please refer to our Home page. We've already assembled it so that you can confirm the screws' position, etc. Please take apart all of the parts, or you cannot complete the equipment. When you disassemble, please be careful not to lose the screws. If you do, you can buy the same screws at the store. You need to buy an exclusive screw driver as well. We will recommend this item for those who are famililar with Cube itself. *Beginners, or people who are not good at disassembling machines, should be more careful.

HOW TO ASSEMBLE（Do not make use of the photos without permission. It is prohibited.）

*Please note!* This is only for auction in Japan. We do not offer and send it to overseas at this moment.

Please buy PowerMacG4 in advance. Only AndCube is offered at our side.

Please take apart all of the parts as you see.

Please be careful not to lose the screws.

Please remove the six screws on the internal frame by driver.

Tighten up the M3.5 screws; each 3 pieces at the front and back side., not too tight. Please adjust the hole and the electric power switch.

Put the hole at the center of the body.

Put the upper arm and down arm, refering to the above photos. It would be better not to be tight at this stage.

Put the side board in place, tighten up all of the screws, and finished!

It is safe to carry with the handle. We designed tastefully the back side as well.

You can connect with perpheral equipment from back side. It is very convenient. It has a 20-mm-high space where you can insert a 2.5 inch USBHD case. It is not wide enough for a 3.5 inch HD, though. If it is necessary, you can check its serial number.

The CD slot is arranged at the same place as ordinary PCs. Now I can take in and out CD-ROMs without difficulty. I cannot say that all PCs are the same way. I hope you also can feel comfortable.


			These are vacant AndCubes They are without CUBE in it. Set up CUBE inside, and you will have a completed AndCube.


	Attention.

	*******（Please read!）**************** (a)It requires renovating the main body. Even if the main body would be broken, we cannot take responsibility. (b)We cannot avoid traces being caused during our process. If you want a perfect and flawless one, we are afraid that we cannot meet your expectations. (If you mind traces or ask for perfection, please file the spot smooth. Do it slowly and closely, and you can make it beautiful. Do not scratch. If you are not good at it, you had better not try it.) (c)Most of the production is done by hand. There are some flaws on both sides, especially the reverse. Anodizing process is the same. The color is uneven depending upon the workman's skill. Please accept it. We will do our best to complete it as beautifully as possible. (d)Design, shape, parts, etc., are usually changeable. Please refrain from ordering additional parts. (e)There is no instruction manual. Please refer to our home page and print it if necessary. (f)These are not machines. They are assembled and checked one by one, but in case of failure, we will assemble it again. Please understand that trace caused in the process : flaws,fading color, etc., are not regarded as failure. (g)We do not have extra stock. Please purchase when this model is up for Inter-net auction. At this moment, we do not sell directly, and do not look for any agency shop, either. (h)**If you break or lose screws, please buy them at the store.