Dress Cube Two + Unit　　
Radiating & cooling case for Power Mac G4 Cube (not for WinPC）
The former model, DressCube, is reborn into a bear bone.
Let's dress up your Power Mac G4 Cube!

Dress Cube Two+ Unit

Radiating & cooling bear bone for Power Mac G4
?`This is a set of dressCubeTwo and Unit for making Power Mac G5 taste radiation bear bone. Please purchase by set, not only one of these.

Merits:
＊This is made of aluminum, which radiates heat effectively.
(aluminum board 2.0 mm thick; width 206 mm X depth 206 mm X height 285 mm)
＊'Dress Cube Two' is anodized.It looks brown in the picture, but the color is white.
＊'Unit' is genuine aluminum board 2.0 mm thick. It is not anodized, but is has the same radiation effect.
＊It is possible to take CDs in and out of the top space.
＊This model has some punches on the front.
＊The backside also has some punches which help the importance base radiating.
＊It is a size bigger than an acrylic case, so we can expect radiating effect. We recommend this item to those who expand Power Mac G4 Cube.
＊You can use this model either way, as a case or a bear bone.
＊DressCube has a cylinder, but Dress Cube Two+Unit doesn't. That makes it look more like G5.
＊It looks like G5, but it is not exactly the same design.
DressCubeTwo+Unit
Required parts
（Please prepare the main body of PowerMacG4 Cube by yourself.）
PHOTOS（Please click here.）
As a case（Please click here.）
As a bear bone（Please click here.）
Attention.
*********（Please read!）********************
(A)(For those who use this item as a case)
It just covers the main body, so it cannot be carried together at once.The grip on the top is not for carrying. It is a so-called ornament.
When you assemble Dress Cube, please be careful not to scratch the acrylic main body.
We recommend the use of a urethane resin.
(B)(For those who use this item as a bare bone)
That means you remodel the Cube. Please do it at your own risk.
(C)We cannot avoid traces being caused during our process. If you want a perfect and flawless
one, we are afraid that we cannot meet your expectations.
Please refere to1_2_3 ）
(D)Most of the production is done by hand, so there are some flaws on both sides, especially the reverse. Anodizing process is the same. The color is uneven depending upon the workman's
skill. Please accept it. We will do our best to complete it as beautifully as possible.

(E)Design, shape, parts, etc., are usually changeable. Please refrain from ordering additional parts.
(F)There is no instruction manual. Please refer to our home page and print it if necessary.
(G)These are not machines. They are assembled and checked one by one, but in case of failure, we will assemble it again. Please understand that trace caused in the process : flaws,fading color, etc., are not regarded as failure.
(H)*Please note!* This is only for auction in Japan. We do not offer and send it to overseas at this moment.

無料アクセスカウンター